Screen Shot 2020-03-15 at 9.00.40 PM

A tiny replica of the chair.

FROM THE ARTIST’S STUDIO
As we said, we need to make a little sculpture to have something to go big. The entire small sculpture of Booker T. Washington is going to be 10 inches high without a base.  It was the task of Bridgette’s assistant to take every measurement off of the large chair and figure out what proportion she needed to reduce it down.

Bridgette found a great deal of wood from Texas Art and taxed the assistant to replicate the chair. Bridgette knew some modifications would be needed. They would never be able to find the exact size of wood, but that is alright. They will add clay to the wooden chair to make it work.

Teachers and Students
Do you think you could replicate a piece of furniture you have in your school or home? What math would you need to be able to do this? What is the proportion of reduction.

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

booker t measurementsFROM THE ARTIST’S STUDIO
The team decide that the artist will make two sculptures. One will be a small table top version of the sculpture. These can be made into limited edition bronzes and may help the team raise additional funds. They can give them to those donating large sums of money or they can sell the outright. Stay tuned for information on this.

The other sculpture is the one for the campus. It will look very similar to the small sculpture but it will be 1 and 1/2 life size and will rest on a pedestal.  Bridgette will also use the small one to help to create the large one.

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

 

FROM THE ARTIST’S STUDIO
IMG_2330 (1)Having reference is very important. Sculptor Bridgette Mongeon figured that Dr. Phillips was about the same Height as Booker T. Washington. So she took the chair to the school and asked him to pose like Booker T. Apparently, Booker T. was a bit more flexible because the pose is not the same. But what this pose does, is it helps the artist to see a relationship. She can see the chair that she has in her possession and how it compares to a real man. It gives her visual information that she might not otherwise have. It would be great if Dr. Phillips was clothed in the exact waistcoat and coattails as Booker T. in the photographs. But this will do.

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

 

400px-BookerTWashington-Cheynes.LOC

A pin stripe is a bold fashion statement

FROM THE ARTIST’S STUDIO
When searching through the images of Booker T. Washington, I must focus on the clothes. I do this for a couple of reasons. First, I’m sculpting them. I must know more about them. The one thing I like about all of my sculpture commissions is that there is a historical aspect to them.

When I sculpted the Newsboy for The Texas Press Association, I had to research the clothes that a Newsboy would wear. I learned so much. Interestingly, this is the same period as this Booker T. Washington sculpture. (As a side note: there was a big newsboy strike of 1899. Children everywhere made a considerable difference in the world because of this. )

layout_newsboy

Bridgette Mongeon’s Newsboy created for the Texas Press Association. Limited edition bronze.

Clothes can tell us a lot about the person, the period, the stature, social norms, etc. With my Newsboy, I learned that as the boys aged, their length of pants was an indication of maturity. In the production of The Music Man, which was set in 1912, there is a song titled “You Got Trouble”, with a line that says “the minute your son leaves the house does he unbuckled his knickerbockers below the knee?” Boys wanted their knickers long to show that they were grown up, so they would buckle them below the knee. I learned a lot about that time period by studying the clothes. I found an old pattern and sewed a reference outfit from that pattern for my sculpture.

Screen Shot 2020-03-14 at 9.52.31 PM

Sculptor Bridgette Mongeon searched the internet for standing images of Booker T. Washington. She will use these to be able to get the proportions for a small sculpture.

When I watched the show Downton Abbey I learned that you could tell how wealthy a man was by the size of his top hat. Understanding clothing and textiles teach us about history, technology, and social aspects of the time.

Let’s see what we can find out about the clothes that Booker T. Washington wore.

First, let’s put this in context.

  • Booker T Washington lived 1856 – 1915
  • The Emancipation Proclamation 1863 (Booker T. would have been six or seven years old.)
  • The civil war 1861 –1865 ( Booker T. was nine years old when it ended.)
  • The sewing machine was invented in September 1846.  They went into productions in the the 1850’s.  At this point a foot petal moved these machines.
  • The electric-powered sewing machine did arrive until about 1905.
  • The modern zipper came about around 1917 So, Booker T. had a button fly.
  • First Sears catalog was in 1889. Booker T. would have been 33.

Booker T. WashingtonKnowing these things, I can assume that most of his clothes would have been hand made. He may have purchased a few things off the rack, but you must know it is not like it is now. You could not just walk into a large department store. Perhaps he purchased his clothes from an old Sears catalog? Sears had a catalog from which you could purchase anything, including a house.

When wanting to know more about this subject. I had to do what I always do when approached with the history of which I am not sure. I consult those who know more than I. My sources were my friends from college.

Elizabeth has an MFA in fashion and costume and is a costume designer, and a costume historian.

Christine is a textile and a prototype designer at an engineering company.

I learned that clothing changes depending on the period and stature. For example, a man’s tie, before this period would have been more like a fancy scarf called a cravat. Did they become smaller because of the cost of the material? Booker T’s tie is more like a very small bow tie.

The material in the suit was probably wool. I had always thought wool was hot, but my informed friends tell me that it is not necessarily hot; in fact, it breaths. But how was that cleaned? They didn’t have a dry cleaner. One of my sources said that they often had many shirts, but not many suits. Brushing the suit off was one way to clean it.

You have heard the term “dress the part.” Booker T. had to be around a lot of important people. He had to try to win them over, and often, he would be fundraising for his projects. He had to “dress the part”. Booker T. would try to mimic high society, but not be too flamboyant.

The vests we see him wearing are referred to as a waistcoats. The neckline of the waistcoat changed, as you can see in these pictures, so did the size of the lapel. The size of the lapel on the jacket could be indicative of a man’s wealth, but so was the type of material and how well the suit was made. The coat that he wears over this waistcoat is called the morning coat, often longer in the back. We might think it looks more like coattails. As one source said, “Men at this point, were not dressing up to show their wealth, they were dressing up to show their character. If they wanted to show their wealth, one needed to look at how the wife dressed.” I thought this was a fascinating statement, and we could do much more research on the wife of Booker T. Washington and what she was wearing in photographs. Booker T. was also dressing to show his equality with others.

One resource commented on the pinstripe suit. In this pinstripe which is probably grey or brown, it was a fashion-forward decision, because it is a bolder choice. “I would guess Booker T. knows he is a celebrity and is always trying to look good. He is trying to promote his people.”

I have learned a lot about clothes. Now I must sculpt them. But I have some other details to work out first.

Teachers and Students

  • Read more about the Newsies Strike of 1899. What did the kids do to make a difference?
  • Would Booker T. Washington be featured in the newspapers? What was his influence with newspapers?
  • Students can extend their research to the wife of Booker T. Washington and her clothes. What did she wear? What does it mean?
  • What other things can you find out about clothing manufacturing and when it began. What types of machines were invented, and when?
  • We learned about copyright a bit, patent is similar, but has to do with inventions. Do you know what happened with the patent of the sewing machine?
  • What prices surprises you the most when you look up old photographs of the Sears Catalogue?

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

IMG_1707

A friend has a similar chair. It is original, it is old, but it is a good resource.

FROM THE ARTIST’S STUDIO
Sculptor Bridgette Mongeon counts on her social media followers to help her find information and resources. She has located everything from old teapots to models, and a trampoline needed for photos for reference. Once again, her social media friends come through. She posts the image of Booker T. and asks everyone what type of chair it is. A friend responds. “It appears to be an early 1900s Arts & Crafts style chair. (corbels under the arms, mortise and tendon construction). There were a number of arts & crafts (sometimes also referred to as mission) furniture and chair-makers in the early 1900s: Gustave Stickley, L&JG Stickley, Stickley Brothers, Roycroft, Limbert, Hardin, and others. From the seat bottom on this chair, my guess is early early 1900s. (No springs in the seat bottom). Many of the chairs from that period were made out of white oak and fumed. If the chair has flecking in it, then it was made with quarter-sawn oak. Some chair makers marked or “signed” their pieces either with a stamp, paper label, metal label, etc. Some Chairs can also be identified to the maker by finding the chair in an old Catalog, and some of those catalogs have been reprinted for purchase today.”

She has hit the jackpot in the information. Her friend guess in furniture also fits the time period— Booker T. Washington lived (1856-1915).
The artists searched further and discovered in Booker T Washington’s writing that the students had to make their own furniture. One can’t help but wonder how their skills improved over time.Screen Shot 2020-03-14 at 9.37.03 PM

  • Teachers and students
    What did the term “mission style” come from? What period is it, and what type of furniture did it replace?
  • What is the “Art’s and Craft’s” period?

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

 

FROM THE ARTIST’S STUDIO

dallas baptistuniversity praying man

The sculpture “Called to Pray.” The chair developed its own personality.

As sculptor Bridgette Mongeon began to research images of a seated Booker T. Washington, she found quite a few. The one that the team at Booker T. Washington High School liked was the one of Booker T on the stool. Further investigation brought the artist to another similar image of Booker T. in a chair with arms.

dallasbaptistprayingman_chair

The artists favorite view of the sculpture depicts the intensity of prayer. This exact view will never be seen by anyone after the back is added.

An artist must look at all aspects of the piece of art. What “feel” do people get from a seated figure of booker T. Washington on a stool compared to having him in a chair with arms? This project reminded the artist of another project. Dallas Baptist University commissioned Bridgette to do a sculpture of a praying man. The school wanted a man on his knees praying. The bible would be either in his hands or on a chair. After much deliberation, a rocking chair in the Dean’s office caught her eye. She wondered how many hours he had sat praying over the school, in this chair. The more she thought about it, the more the chair began to have its own personality. She replicated this chair in the Dallas Baptist sculpture “Called to Pray.” The more the artist began to think about the project for Booker T. Washington High School, the more she was leaning toward the chair with the handles and strong back. It depicted strength, stability, assuredness. Now, to find that chair.

TEACHERS AND STUDENTS

What other famous sculptures depict a man in a chair?  How does the chair make you feel? What do you think the artist was trying to make you feel?  Is there a chair or an object in your home that has a personality? What is it? Why do you think it has a personality and what would it be?

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

FROM THE ARTIST’S STUDIO
When you are trying to do a sculpture, you need proportions. Art is a lot of times about comparison. I am comparing this shape to this shape or this proportion to this proportion. Often I will try to find a subject that is the same height and stature as my subject matter. Dress them up in the appropriate close and photograph them. But how do you find out how tall someone is that lived over 100 years ago? In the case of this image, I have hit the jackpot. Taft was 6’, and Andrew Carnegie was 5’ 3”. Booker T Washington was about 5’ 7” tall.

(Left to right) Robert C. Ogden, Senator William Howard Taft, Booker T. Washington and Andrew Carnegie, standing on the steps of a building, at the Tuskegee Institute’s 25th anniversary celebration

Questions
In this picture that I found on the internet, Booker T stands with three other men. What do these men do that are so important? Why would Booker T Washington be photographed with these men? How did he meet each of these men?

I would love to know what you find out. It helps me with my inspiration for the piece. Thanks for your participation.

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

400px-BookerTWashington-Cheynes.LOCAfter careful consideration, the team at Booker T. Washington High school decided to change the direction of the design of the sculpture. They liked the photograph of Booker T. on a stool looking at a book. There are several photographs with a similar look. In some photographs, he is sitting in a chair instead of a stool. The sculptor will now change directions to see about recreating this look. Bridgette will no longer need to look at 3D scanning and enlarging using 3D printing to bronze casting. But she will be using digital technology in the sculpture. Will the final sculpture be life-size or larger than life? It’s back to the drawing board.

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter

 

Screen Shot 2020-03-14 at 8.42.32 PM

The Smithsonian has an entire section filled with 3D models that students can look at. 3D scanning our precious artifacts insures that we will have record of them for a long time.

FROM THE ARTIST’S STUDIO
3D scanning 3D printing, artwork and synchronicity.
As sculptor Bridgette Mongeon was on her educational journey of recreating “Lifting the Veil of Ignorance” for Booker T. Washington High School, she has also been on another journey for another “out of this world project” that would use the same processes. Kindness Without Limits commissioned her to create a sculpture of Neil Armstrong walking on the moon. She will create one sculpture, but she will make two casts from the mold. If you read the post that showed the sculpture casting process of the Grambling tiger, you will see that there are many steps in the casting process. If you go directly from 3D printing to investment casting, what is lost is the opportunity to make multiples. Usually, an artist will make a limited edition of a sculpture. They have a mold, and they can cast more from that mold. But, if you go directly from the art in the computer to 3D printing in investment casting, there is no mold. Each time another sculpture would be made, the sculptor would have to order another 3D print. Creating a bronze from a 3D print is usually not advised in a sculpture where the artist will make multiples, as it would not be cost-effective. However, you could have the 3D print made and make a mold of that 3D print.

In the cast of Neil Armstrong, one in the edition would go to Space Center Houston, and the second in the edition is going to Russia. Reference material for creating a sculpture is so important. In the case of Neil Armstrong’s spacesuit, it did not take the artist very long to realize that there are many different space suits with many details. It would be very easy to put Neil Armstrong in the wrong spacesuit accidentally. In comes 3D technology- in2015 there was a Kickstarter campaign to 3D scan Neil Armstrong’s spacesuit. The Smithsonian did these 3d scans because No one created the spacesuit to go to the moon, come back, and last 50 years. It was deteriorating. If a 3D scan is made, the suit can be documented and that digital data is preserved, even if the spacesuit continues to deteriorate.

Many museums are doing this now. You can even get 3D models of things to 3D print or examine online. The artist is desperate to get that digital data, but you can imagine. It is under lock and key. Who owns the copyright? We learned a little about copyright and artwork. Copyright concerning 3D files is another thing entirely. How can the artist get permission to use these 3D files? This is still something with which she is working. However, the 3D data of the suit was taken and 3D printed at life-size using the technology mentioned in the previous posts. The spacesuits will be on display at different ball fields throughout the United States. Houston is supposed to get one. At the very least, having access to this spacesuit display will be an incredible resource for Bridgette to be able to sculpt the correct suit with the exact details. There is synchronicity in how things work. You work on one project, and the information you learn can be used on another project. Who would ever have thought that Booker T. Washington and Neil Armstrong would have something in common?

To watch how this was done check out this video
[youtube https://www.youtube.com/watch?v=sNeou5p5f5s]

Teachers

Author Sculptor Bridgette Mongeon

https://www.instagram.com/bridgettemongeon/
https://www.facebook.com/BridgetteMongeonSculptor/
https://twitter.com/sculptorwriter